DSPIC33EP64MC506-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64MC506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 16mA |
| Speed | 70 MHz |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Format | FLOATING-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP64MC506-I/PT Overview
As a result, it is available in the 64-TQFP package. Surface Mount is the way to mount it. It comes in a Tray package. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 53 I/Os have been provided by the device. It has a part number of DSPIC33EP64MC506 that can be used to locate similar components. The terminals of this device are located at QUAD. This circuit consists of 64 terminationals. This electrical component is part of the dsPIC? 33EP series. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 64 pins are used. On it, there are 64 pins. The component is included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 64kB. The system is highly efficient when working at a frequency of 60MHz. The supply voltage of 3.3V's adaptability can be fully utilised by designers. It appears that there are 5 timers/counters in use. Using an oscillator type of Internal, it works.
DSPIC33EP64MC506-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64MC506-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP64MC506-I/PT Microcontroller applications.
- Refrigerators
- Nintendo
- Walkie talkies
- Robots
- DDC control
- Christmas lights
- Food and beverage
- Oscilloscopes
- Toys
- Kindle
