DSPIC33EV64GM104-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | dsPIC™ 33EV |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | A/D CONVERTERS IS ALSO AVAILABLE IN 24-CH 10-BIT, OPERATES UPTO 70MIPS |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EV64GM1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 70 MIPs |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 31mA |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Max Frequency | 7.37MHz |
| Format | FLOATING-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
DSPIC33EV64GM104-I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. This is mounted using the Surface Mount method. This item can be found in package Tray. Devices with dsPIC core processors are available. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. 35 I/Os have been provided by the device. Other components that are comparable to it have the base part number DSPIC33EV64GM1. The terminals of this device are set to QUAD. In this case, there are 44 terminationals. There are a number of electrical components in the dsPIC? 33EV series, including this one. Because the supply voltage is 5V, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. The structure is constructed from 44 pins. In the subcategory of Digital Signal Processors, this component is included. Using the devices' 64kB memory size, you can store programs and data. There is a maximum current supply of 31mA. A 5V source of power is being used to run it. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are 9 timers/counters. A maximum frequency of 7.37MHz is set for the device. The property of A/D CONVERTERS IS ALSO AVAILABLE IN 24-CH 10-BIT, OPERATES UPTO 70MIPS is also possessed by it. It works with an oscillator type Internal.
DSPIC33EV64GM104-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EV64GM104-I/PT Applications
There are a lot of Microchip Technology DSPIC33EV64GM104-I/PT Microcontroller applications.
- Smartphone
- Embedded gateways
- Smartphones-calling, video calling, texting, email
- Glucose monitoring systems (for Type 1 Diabetes)
- Ipod
- Hand-held metering systems
- Computer/laptop
- Light sensing & controlling devices
- Automatic control
- Entertainment-radios, CD players, televisions
