DSPIC33FJ128GP306-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP306 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 1 Mb |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP306-I/PT Overview
There is an option to purchase it in the 64-TQFP package, which saves space. Surface Mount is used for mounting. In the package Tray, it is included. There is a dsPIC as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. 53 I/Os can be found on it. A component with the same part number as DSPIC33FJ128GP306 can be compared to other similar components. The terminals of this device are set to QUAD. 64 terminations are present in it. In the dsPIC? 33F series, this electrical component is found. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 64 pins. The mounting of this device is carried out following the method of Surface Mount. Total number of pins is 64. This component is a part of Digital Signal Processors. The devices have a memory size of 128kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 9 timers/counters are present. Internal is the oscillator type it uses.
DSPIC33FJ128GP306-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP306-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP306-I/PT Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Electromechanical control
- Calculators
- Data acquisition and control
- Multi-meter
- Blenders
- Home video and audio
- Digital set-top boxes
- Fire detection & safety devices
- Television
