DSPIC33FJ128GP706T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP706 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP706T-I/PT Overview
For space savings, it is available in the 64-TQFP package. Mounted using Surface Mount. In the package Tape & Reel (TR), it is included. The device runs in dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. A total of 53 I/Os are available on this device. A comparable component can be found by using the base part number DSPIC33FJ128GP706. QUAD is the position of its terminals on the board. 64 terminationals are present. It is a member of the dsPIC? 33F series of electrical components. High efficiency is possible due to the 3.3V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. There are 64 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. It has a total of 64 pins on it. This is a component included in Digital Signal Processors. The devices have a maximum memory size of 128kB that can be used to store programs and data. It performs extremely well at a frequency of 40MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. 9 timer/counters are present. The oscillator type Internal is used to operate the device.
DSPIC33FJ128GP706T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP706T-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP706T-I/PT Microcontroller applications.
- Fire detection & safety devices
- Leakage current tester
- Home appliances
- Process control devices
- Microwave ovens
- Walkie talkies
- Projectors
- Hearing aids
- Paper shredders
- Hand-held metering systems
