DSPIC33FJ128GP708-I/PT
| Parameters | |
|---|---|
| Nominal Supply Current | 46mA |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FIXED-POINT |
| Number of ADC Channels | 24 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP708 |
| Pin Count | 80 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
DSPIC33FJ128GP708-I/PT Overview
Due to its space-saving qualities, it is available in the 80-TQFP package. The way of Surface Mount is used to mount it. It is available in the Tray package. Devices with dsPIC core processors are available. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. 69 I/Os are present on the device. It has a base part number of DSPIC33FJ128GP708 that can be used to find other components that are comparable. This device has terminals at QUAD. In this case, there are 80 terminationals. An electrical component such as this is included in the series dsPIC? 33F. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A number of 80 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. There are 80 pins on it. In the subcategory of Digital Signal Processors, this component is included. Data and programs can be stored on the devices with a memory size of 128kB. Working at a frequency of 40MHz results in excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. It appears that there are 9 timers/counters in use. The oscillator type Internal is used to operate the device.
DSPIC33FJ128GP708-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP708-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP708-I/PT Microcontroller applications.
- Fire detection & safety devices
- Smart instruments
- Embedded gateways
- Computer/laptop
- Removable disks
- DCS control intelligent sensor
- Switches
- Instrument control
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Food and beverage
