DSPIC33FJ128GP710-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP710-I/PF Overview
There is a 100-TQFP package available to save space. Mounted using Surface Mount. There is a Tray package available for it. A core processor of dsPIC is present in the device. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. 85 I/Os are present on the device. It has a part number of DSPIC33FJ128GP710 that can be used to locate similar components. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 100 terminations present. It is a member of the dsPIC? 33F series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. The structure is composed of 100 pins. During the mounting process, the device is mounted based on the Surface Mount method. In total, it has 100 pins. The component is included in Digital Signal Processors. Memory size for the devices is 128kB, which can be used to store programs and data. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 9 counters/timers are currently active. Using an oscillator type Internal, it operates.
DSPIC33FJ128GP710-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP710-I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ128GP710-I/PF Microcontroller applications.
- Wastewater treatment
- Walkie talkies
- Fabric
- Digital set-top boxes
- Dialysis machines (performs function of liver)
- Microwave ovens
- Blenders
- Dishwashers
- Food and beverage
- Xbox
