DSPIC33FJ128GP710-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP710-I/PT Overview
A space-saving advantage is that it is included in the 100-TQFP package. Surface Mount is used for mounting. In the package Tray, it is included. The device runs in dsPIC core processor. Work should be done at -40°C~85°C TA. FLASH is its program memory type. 85 I/Os are present on the device. It has a base part number of DSPIC33FJ128GP710 that can be used to find other components that are comparable. The position of the device is QUAD at terminal. This circuit consists of 100 terminationals. The dsPIC? 33F series includes this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 100 pins are used in its construction. Based on the Surface Mount method, it is mounted. Total number of pins is 100. This is a component included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 128kB. Working at a frequency of 40MHz results in excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. A total of 9 timers/counters have been set up. Using an oscillator type Internal, it operates.
DSPIC33FJ128GP710-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP710-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP710-I/PT Microcontroller applications.
- Microwave ovens
- Keyboards
- Data acquisition and control
- Smartphones-calling, video calling, texting, email
- Electrocardiogram (EKG)
- Laminators
- Industrial instrumentation devices
- Dishwashers
- Microwave ovens
- Washing machine
