DSPIC33FJ128GP802-E/SO
| Parameters | |
|---|---|
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| Format | FLOATING-POINT |
DSPIC33FJ128GP802-E/SO Overview
For space savings, it is available in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. Tube is the package that contains it. The device has a dsPIC core processor. Work should be done at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. A total of 21 I/Os are present. To find equivalent components, use its DSPIC33FJ128GP802 base part number. At DUAL, it has its terminals. A 28 termination is contained within it. Part of the Automotive, AEC-Q100, dsPIC? 33F series, this electrical component is used in a variety of applications. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A number of 28 pins are used to construct it. According to Surface Mount, it is mounted. It has a total of 28 pins on it. The component is included in Digital Signal Processors. The devices have a memory size of 128kB that can be used to store programs and data. It should be noted that 76mA represents the maximum supply current. When working at a frequency of 40MHz it is able to achieve excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. There are 5 timers/counters. Internal is the oscillator type it uses.
DSPIC33FJ128GP802-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP802-E/SO Applications
There are a lot of Microchip Technology DSPIC33FJ128GP802-E/SO Microcontroller applications.
- Oil and gas
- Calculators
- Answering machines
- Robots
- Robotic prosthetic limbs
- Hard drives
- Data acquisition and control
- Digital cameras
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Entertainment products
