DSPIC33FJ128GP802-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ128GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 3.3mm |
| Length | 34.67mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP802-E/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. It comes in a Tube package. The device runs in dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. 21 I/Os are present on the device. Based on the DSPIC33FJ128GP802 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. It has 28 terminationals. There are a number of electrical components in the Automotive, AEC-Q100, dsPIC? 33F series, including this one. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 28 pins. The mounting of this device is carried out following the method of Through Hole. A total of 28 pins are attached to it. This component is a part of Digital Signal Processors. A device with a memory size of 128kB can store programs and data. It should be noted that 76mA represents the maximum supply current. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. A total of 5 timers/counters have been set up. There is an oscillator type Internal used in this circuit.
DSPIC33FJ128GP802-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ128GP802-E/SP Applications
There are a lot of Microchip Technology DSPIC33FJ128GP802-E/SP Microcontroller applications.
- Dryers
- Heater/Fan
- Process control devices
- Teletext terminals
- Calculators
- Home video and audio
- Information appliances (networking of household appliances)
- Aerospace navigation systems
- Electromechanical control
- DDC control
