DSPIC33FJ128GP802-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Nominal Supply Current | 34mA |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 4 |
| Number of SPI Channels | 2 |
| Height | 2.05mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP802-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Using Surface Mount, it is mounted. It comes in the package?of a Tube. Devices with dsPIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 21 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number DSPIC33FJ128GP802. At DUAL, its terminals are located. A 28 termination is contained within it. The electrical component is part of the series dsPIC? 33F. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. The structure is composed of 28 pins. It is mounted based on the method of Surface Mount. Total number of pins is 28. It falls under the category of Digital Signal Processors. Using the devices' 128kB memory size, you can store programs and data. When working at a frequency of 40MHz it is able to achieve excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. 5 timer/counters are present. Using an oscillator type of Internal, it works.
DSPIC33FJ128GP802-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP802-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ128GP802-I/SO Microcontroller applications.
- Petrochemical
- Missile control
- Ipad
- Sonography (Ultrasound imaging)
- Printers
- Light sensing & controlling devices
- Xbox
- Embedded gateways
- Hand-held metering systems
- Industrial robot
