DSPIC33FJ128GP802T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ128GP802T-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Using Surface Mount, it is mounted. Tape & Reel (TR) is the package that contains it. There is a dsPIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 21 I/Os on the board. Other components that are comparable to it have the base part number DSPIC33FJ128GP802. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 28 terminations present. This electrical component is part of the dsPIC? 33F series. By using a 3.3V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 28 pins in total. Digital Signal Processors contains this component. In order to store data and programs, the devices have a memory size of 128kB. It is highly efficient when it works at a frequency of 40MHz. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. A total of 5 timers/counters are present. Internal is the oscillator type it uses.
DSPIC33FJ128GP802T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP802T-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ128GP802T-I/SO Microcontroller applications.
- Oil and gas
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Virtual reality VR robots
- Printers
- Aerospace navigation systems
- Dryers
- Home video and audio
- Coffee machines
- DDC control
- Multi-meter
