DSPIC33FJ128GP804-H/PT
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.2.A |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 40 MIPs |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Max Frequency | 40MHz |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
DSPIC33FJ128GP804-H/PT Overview
For space savings, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. In the package Tray, it is included. dsPIC core processor is present on the device. Work should be done at -40°C~150°C TA. FLASH has been assigned to it as a program memory. 35 I/Os are present on the device. In order to find similar components, it has a base part number of DSPIC33FJ128GP804. QUAD is the location of its terminals. Currently, it consists of 44 terminationals. Automotive, AEC-Q100, dsPIC? 33F is the series number of this electrical component. The supply voltage of 3.3V allows for high efficiency. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. It is constructed using 44 pins. It is equipped with 44 pins in total. In the subcategory of Digital Signal Processors, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 128kB. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 5 counters/timers are currently active. The device operates with a max frequency of 40MHz. Using an oscillator type Internal, it operates.
DSPIC33FJ128GP804-H/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP804-H/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP804-H/PT Microcontroller applications.
- Dryers
- Embedded gateways
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Missile control
- Petrochemical
- Volt meter
- Electrocardiogram (EKG)
- Accu-check
- Data acquisition and control
- Entertainment products
