DSPIC33FJ128GP804-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128GP804-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. It is mounted using the way of Surface Mount. A package of Tube contains it. A core processor of dsPIC is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 35 I/Os on it, which makes it a very simple device. It has a base part number of DSPIC33FJ128GP804 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 44 terminations present. The dsPIC? 33F series includes this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. 44 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 44 pins are attached to it. This is a component included in Digital Signal Processors. Using the devices' 128kB memory size, you can store programs and data. Using a frequency of 40MHz, it is very efficient. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. In total, there are 5 timers and counters. Using an oscillator type of Internal, it works.
DSPIC33FJ128GP804-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP804-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ128GP804-I/ML Microcontroller applications.
- Walkie talkies
- Smart highways (navigation, traffic control, information monitoring and car service)
- Entertainment products
- 3D printers
- Petrochemical
- Hard drives
- Routers
- Tape drives
- Dialysis machines (performs function of liver)
- Ipad
