DSPIC33FJ128GP804-I/PT
| Parameters | |
|---|---|
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 34mA |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 13 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128GP804 |
DSPIC33FJ128GP804-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. Mounted using Surface Mount. It comes in the package?of a Tray. dsPIC core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 35 I/Os have been provided by the device. To find equivalent components, use its DSPIC33FJ128GP804 base part number. This device has terminals at QUAD. 44 terminations are present in it. In the dsPIC? 33F series, this electrical component is found. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. The structure is constructed from 44 pins. According to Surface Mount, it is mounted. It is equipped with 44 pins in total. The component is included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 128kB. Working at a frequency of 40MHz results in excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are 5 timers/counters. Using oscillator type Internal makes it work.
DSPIC33FJ128GP804-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128GP804-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128GP804-I/PT Microcontroller applications.
- Dishwashers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Oscilloscopes
- Magnetic resonance imaging (MRI)
- Laminators
- Petrochemical
- Routers
- Pacemakers (used to control abnormal heart rhythm)
- Broadband technology, video and voice processing
- Fire detection & safety devices
