DSPIC33FJ128MC202-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC202-I/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in a Tube package. dsPIC core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. The device has 21 I/Os. A comparable component can be found by using the base part number DSPIC33FJ128MC202. QUAD is the location of its terminals. Currently, it consists of 28 terminationals. dsPIC? 33F is the series number of this electrical component. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed using 28 pins. Based on the Surface Mount method, it is mounted. A total of 28 pins are attached to it. In Digital Signal Processors, this component is included. A device with a memory size of 128kB can store programs and data. A maximum supply current of 76mA is set. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. In total, there are 5 timers and counters. An oscillator of type Internal is used.
DSPIC33FJ128MC202-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC202-I/MM Applications
There are a lot of Microchip Technology DSPIC33FJ128MC202-I/MM Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Aerospace navigation systems
- Multi-meter
- Answering machines
- Safety -airbags, automatic braking system (ABS)
- Robots
- Glucose monitoring systems (for Type 1 Diabetes)
- Industrial instrumentation devices
- Embedded gateways
- Keyboards
