DSPIC33FJ128MC202-I/SP
| Parameters | |
|---|---|
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| ROM (words) | 43690 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of SPI Channels | 2 |
| Height | 3.3mm |
| Length | 34.67mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ128MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
DSPIC33FJ128MC202-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Through Hole is the way to mount it. A package of Tube contains it. There is a dsPIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 21 I/Os on it, which makes it a very simple device. A component with the same part number as DSPIC33FJ128MC202 can be compared to other similar components. This device has terminals at DUAL. 28 terminations are present in it. The electrical component is part of the series dsPIC? 33F. The 3.3V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. According to Through Hole, it is mounted. This device has a total of 28 pins. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. In this case, 76mA represents the maximum current supply. Using a frequency of 40MHz, it is very efficient. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. There are currently 5 timers/counters set up on the system. An oscillator type Internal is required for it to work.
DSPIC33FJ128MC202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ128MC202-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ128MC202-I/SP Microcontroller applications.
- Robotic prosthetic limbs
- Home video and audio
- Entertainment products
- Christmas lights
- Mobile computers
- Teletext terminals
- Graphic terminals
- Smart highways (navigation, traffic control, information monitoring and car service)
- Dialysis machines (performs function of liver)
- Nintendo
