DSPIC33FJ128MC204-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC204-E/PT Overview
There is an option to purchase it in the 44-TQFP package, which saves space. Mounted using Surface Mount. You can find it in the package of Tray. A core processor of dsPIC is present in the device. When working, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. There are 35 I/Os on the board. It has a part number of DSPIC33FJ128MC204 that can be used to locate similar components. At QUAD, its terminals are located. In this case, there are 44 terminationals. Automotive, AEC-Q100, dsPIC? 33F is the series number of this electrical component. Using the 3.3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. For its construction, 44 pins are used. A method of mounting is used, which is Surface Mount. There are a total of 44 pins on it. In the subcategory of Digital Signal Processors, this component is included. In order to store data and programs, the devices have a memory size of 128kB. It is important to note that the maximum supply current is 76mA. Using a frequency of 40MHz, it is very efficient. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. A total of 5 timers/counters have been set up. It works with an oscillator type Internal.
DSPIC33FJ128MC204-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC204-E/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC204-E/PT Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Dryers
- Kindle
- Nintendo
- Calculator
- Dishwashers
- Set-top boxes
- Ipad
- Leakage current tester
- PDAs, game consoles
