DSPIC33FJ128MC204-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| ROM (words) | 43690 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC204-I/ML Overview
There is an option to purchase it in the 44-VQFN Exposed Pad package, which saves space. Surface Mount is used for mounting. It comes in the package?of a Tube. Device with dsPIC core processor issupported. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. There are 35 I/Os on the board. In order to find similar components, it has a base part number of DSPIC33FJ128MC204. At QUAD, it has its terminals. As far as terminations are concerned, there are 44 terminations present. The electrical component is part of the series dsPIC? 33F. High efficiency is possible due to the 3.3V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. 44 pins are used to construct it. A method of mounting is used, which is Surface Mount. Total number of pins is 44. The component is included in Digital Signal Processors. In the device, there is a memory capacity of 128kB which may be used to store programs and data. There is a maximum current supply of 76mA. It is highly efficient when it works at a frequency of 40MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. There are currently 5 timers/counters set up on the system. Internal is the oscillator type it uses.
DSPIC33FJ128MC204-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC204-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ128MC204-I/ML Microcontroller applications.
- Microwave ovens
- Removable disks
- Magnetic resonance imaging (MRI)
- Nintendo
- Home video and audio
- Heater/Fan
- Mobile computers
- Traditional industrial transformation
- Hand-held metering systems
- Equipment control
