DSPIC33FJ128MC510-I/PT
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Density | 1 Mb |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC510 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
DSPIC33FJ128MC510-I/PT Overview
There is an option to purchase it in the 100-TQFP package, which saves space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. It is equipped with a dsPIC core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 85 I/Os on the board. It has a base part number of DSPIC33FJ128MC510 that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. A 100 termination is contained within it. The electrical component is part of the series dsPIC? 33F. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. The structure is composed of 100 pins. This mount is done in accordance with the method of Surface Mount. A total of 100 pins are attached to it. This is a component included in Digital Signal Processors. The devices have a memory size of 128kB that can be used to store programs and data. Using a frequency of 40MHz, it is very efficient. The supply voltage of 3.3V's adaptability can be fully utilised by designers. There are currently 9 timers/counters set up on the system. Using oscillator type Internal makes it work.
DSPIC33FJ128MC510-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC510-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC510-I/PT Microcontroller applications.
- Laminators
- Smartphone
- Volt meter
- Instrument control
- Washing machine
- Equipment control
- DCS control intelligent sensor
- Washing machines
- Switches
- Calculators
