DSPIC33FJ128MC706-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC706 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 1 Mb |
| Number of A/D Converters | 2 |
| Number of Programmable I/O | 85 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC706-I/PT Overview
To save space, it is included in the 64-TQFP package. The way of Surface Mount is used to mount it. You can find it in the package of Tray. With a processor of dsPIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. The type of memory it uses is FLASH. There are 53 I/Os on it. To find equivalent components, use its DSPIC33FJ128MC706 base part number. The terminals of this device are set to QUAD. In this case, there are 64 terminationals. In the dsPIC? 33F series, this electrical component is found. The 3.3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. It is constructed using 64 pins. According to Surface Mount, it is mounted. In total, it has 64 pins. It falls under the category of Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 128kB. The system is highly efficient when working at a frequency of 40MHz. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. It appears that there are 9 timers/counters in use. There are 85 programmable I/Os in the device. Using oscillator type Internal makes it work.
DSPIC33FJ128MC706-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC706-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC706-I/PT Microcontroller applications.
- Information appliances (networking of household appliances)
- Fire detection & safety devices
- Nintendo
- Removable disks
- Computer/laptop
- Embedded gateways
- Blenders
- Automatic staplers
- Air fryers
- Virtual reality VR robots
