DSPIC33FJ128MC708-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC708 |
| Pin Count | 80 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 1 Mb |
| Number of A/D Converters | 2 |
| Format | FIXED-POINT |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 8 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC708-I/PT Overview
For the purpose of saving space, it is available in the 80-TQFP package. Using Surface Mount, it is mounted. Tray is the package that contains it. With a processor of dsPIC cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. 69 I/Os can be found on it. In order to find similar components, it has a base part number of DSPIC33FJ128MC708. QUAD is the position of its terminals on the board. It has 80 terminationals. The dsPIC? 33F series contains this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. It is constructed using 80 pins. According to Surface Mount, it is mounted. This device has a total of 80 pins. In the subcategory of Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. Power is provided by a 3.3V source. At a frequency of 40MHz, it exhibits excellent efficiency. It appears that there are 9 timers/counters in use. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. The oscillator type Internal is used to operate the device.
DSPIC33FJ128MC708-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC708-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC708-I/PT Microcontroller applications.
- Data acquisition and control
- Microwave ovens
- Measuring revolving objects
- Entertainment products
- Refrigerators
- Washing machines
- Dishwashers
- Embedded gateways
- Industrial instrumentation devices
- Copiers
