DSPIC33FJ128MC710-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC710 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 1 Mb |
| Format | FIXED-POINT |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC710-I/PT Overview
There is a 100-TQFP package available to save space. Using Surface Mount, it is mounted. It is available in the Tray package. A core processor of dsPIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. It has a number of 85I/Os. To find comparable components, use the DSPIC33FJ128MC710 base part number. The terminals of this device are set to QUAD. A 100 termination is contained within it. dsPIC? 33F is the series number of this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A number of 100 pins are used to construct it. The method of Surface Mount is used to mount it. There are a total of 100 pins on it. The component is included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 128kB. It is powered by a 3.3V?source. Working at a frequency of 40MHz results in excellent efficiency. 9 timers/counters are in use. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. Using oscillator type Internal makes it work.
DSPIC33FJ128MC710-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC710-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC710-I/PT Microcontroller applications.
- Digital set-top boxes
- Set-top boxes
- Magnetic resonance imaging (MRI)
- Auto-breaking system
- Oscilloscopes
- Toasters
- Coffee machines
- Volt meter
- Embedded gateways
- Glucose monitoring systems (for Type 1 Diabetes)
