DSPIC33FJ128MC802-H/SO
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.2.A |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 20 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 8192 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
DSPIC33FJ128MC802-H/SO Overview
There is an option to purchase it in the 28-SOIC (0.295, 7.50mm Width) package, which saves space. Mounted using Surface Mount. It comes in a Tube package. There is a dsPIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~150°C TA. There is FLASH program memory in it. There are 21 I/Os on it, which makes it a very simple device. To find comparable components, use the DSPIC33FJ128MC802 base part number. The terminals of this device are located at DUAL. In this case, there are 28 terminationals. In the Automotive, AEC-Q100, dsPIC? 33F series, this electrical component is found. The 3.3V supply voltage enables high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. 28 pins are used to construct it. It is mounted based on the method of Surface Mount. On it, there are 28 pins. In the subcategory of Digital Signal Processors, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 128kB. Supply current cannot exceed 76mA. It is highly efficient when it works at a frequency of 40MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. In total, there are 5 timers and counters. There is an oscillator type Internal used in this circuit.
DSPIC33FJ128MC802-H/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC802-H/SO Applications
There are a lot of Microchip Technology DSPIC33FJ128MC802-H/SO Microcontroller applications.
- X-ray
- Washing machines
- Petrochemical
- Missile control
- Dryers
- DCS control intelligent sensor
- Blenders
- Virtual reality VR robots
- Graphic terminals
- Instrument control
