DSPIC33FJ128MC804-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 9 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC804-E/ML Overview
It is available in the 44-VQFN Exposed Pad package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tube. A core processor of dsPIC is present in the device. Work should be done at -40°C~125°C TA. There is FLASH program memory in it. There are 35 I/Os on it. Other components that are comparable to it have the base part number DSPIC33FJ128MC804. The terminals are positioned at QUAD. As far as terminations are concerned, there are 44 terminations present. An electrical component such as this is included in the series Automotive, AEC-Q100, dsPIC? 33F. The 3.3V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 44 pins are used in its construction. Based on the Surface Mount method, it is mounted. It is equipped with 44 pins in total. It is one of the components included in Digital Signal Processors. A device with a memory size of 128kB can store programs and data. There is a maximum current supply of 76mA. It is highly efficient when it works at a frequency of 40MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. 5 counters/timers are currently active. Using an oscillator type of Internal, it works.
DSPIC33FJ128MC804-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC804-E/ML Applications
There are a lot of Microchip Technology DSPIC33FJ128MC804-E/ML Microcontroller applications.
- Mice
- Vacuum cleaners
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Entertainment products
- Industrial robot
- DVD\DV\MP3 players
- Paper shredders
- Hand-held metering systems
- Copiers
- Accu-check
