DSPIC33FJ128MC804-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 9 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC804-E/PT Overview
As a result, it is available in the 44-TQFP package. This is mounted using the Surface Mount method. Tray is the package that contains it. With a processor of dsPIC cores, the device is powered. When working, the temperature should be kept at -40°C~125°C TA. FLASH is its program memory type. There are 35 I/Os on the board. Based on the DSPIC33FJ128MC804 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. Currently, it consists of 44 terminationals. It is a member of the Automotive, AEC-Q100, dsPIC? 33F series of electrical components. High efficiency is possible due to the 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. This mount is done in accordance with the method of Surface Mount. There are a total of 44 pins on it. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. Supply current cannot exceed 76mA. It performs extremely well at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. It appears that there are 5 timers/counters in use. Using an oscillator type Internal, it operates.
DSPIC33FJ128MC804-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC804-E/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC804-E/PT Microcontroller applications.
- Blenders
- Routers
- Auto-breaking system
- Dishwashers
- Scanners
- 3D printers
- Hearing aids
- Dryers
- Digital TVs
- DCS control intelligent sensor
