DSPIC33FJ128MC804-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ128MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| ROM (words) | 43690 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ128MC804-I/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. This item can be found in package Tube. There is a dsPIC as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. 35 I/Os are present on the device. Other components that are comparable to it have the base part number DSPIC33FJ128MC804. The terminals are positioned at QUAD. As far as terminations are concerned, there are 44 terminations present. There are a number of electrical components in the dsPIC? 33F series, including this one. High efficiency is possible due to the 3.3V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 44 pins are used to construct it. Based on the Surface Mount method, it is mounted. A total of 44 pins are attached to it. It is one of the components included in Digital Signal Processors. Using the devices' 128kB memory size, you can store programs and data. 76mA is the maximum supply current. The system is highly efficient when working at a frequency of 40MHz. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. 5 counters/timers are currently active. It works with an oscillator type Internal.
DSPIC33FJ128MC804-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC804-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ128MC804-I/ML Microcontroller applications.
- Magnetic resonance imaging (MRI)
- Electronic jamming systems
- Digital cameras
- Instrument control
- Copiers
- Laminators
- Safety -airbags, automatic braking system (ABS)
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Robots
- Guidance-GPS
