Parameters |
Height Seated (Max) |
1.2mm |
Length |
10mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
44-TQFP |
Number of Pins |
44 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
dsPIC™ 33F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
28 |
ECCN Code |
3A991.A.2 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.8mm |
Frequency |
40MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DSPIC33FJ128MC804 |
Pin Count |
44 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Interface |
CAN, I2C, IrDA, LIN, SPI, UART, USART |
Memory Size |
128kB |
Oscillator Type |
Internal |
Number of I/O |
35 |
RAM Size |
16K x 8 |
Voltage - Supply (Vcc/Vdd) |
3V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
128KB 128K x 8 |
Connectivity |
CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
Supply Current-Max |
76mA |
Bit Size |
16 |
Data Converter |
A/D 9x10b/12b; D/A 6x16b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
YES |
Data Bus Width |
16b |
PWM Channels |
YES |
DAC Channels |
YES |
Number of Timers/Counters |
5 |
ROM (words) |
43690 |
On Chip Program ROM Width |
24 |
Boundary Scan |
YES |
Low Power Mode |
YES |
Format |
FLOATING-POINT |
Integrated Cache |
NO |
RAM (words) |
8192 |
Number of Serial I/Os |
2 |
Number of External Interrupts |
3 |
On Chip Data RAM Width |
16 |
Number of DMA Channels |
8 |
DSPIC33FJ128MC804T-I/PT Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. In this case, it is mounted using the method of Surface Mount. In the package Tape & Reel (TR), it is included. A dsPIC core processor powers the device. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. 35 I/Os have been provided by the device. To find equivalent components, use its DSPIC33FJ128MC804 base part number. The position of the device is QUAD at terminal. 28 terminationals are present. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is composed of 44 pins. As a result, it is mounted in accordance with Surface Mount. In total, it has 44 pins. In Digital Signal Processors, this component is included. A device with a memory size of 128kB can store programs and data. The maximum supply current is set at 76mA. The system is highly efficient when working at a frequency of 40MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. There are 5 timers/counters. An oscillator type Internal is required for it to work.
DSPIC33FJ128MC804T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ128MC804T-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ128MC804T-I/PT Microcontroller applications.
- Graphic terminals
- Electrocardiogram (EKG)
- Hearing aids
- Switches
- Volt meter
- Scanners
- Magnetic resonance imaging (MRI)
- Torpedo guidance
- Aerospace navigation systems
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)