DSPIC33FJ12GP201-E/SO
| Parameters | |
|---|---|
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12GP2 |
| Pin Count | 18 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 13 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 6x12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
DSPIC33FJ12GP201-E/SO Overview
It is available in the 18-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. Using Surface Mount, it is mounted. There is a Tube package available for it. Device with dsPIC core processor issupported. Work should be done at -40°C~125°C TA. FLASH has been assigned to it as a program memory. A total of 13 I/Os are available on this device. Based on the DSPIC33FJ12GP2 base part number, it can be compared with other components. The terminals of this device are set to DUAL. There are a total of 18 terminations in it. The Automotive, AEC-Q100, dsPIC? 33F series contains this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. It is constructed with 18 pins. The method of Surface Mount is used to mount it. There are a total of 18 pins on it. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 12kB. 90mA is the maximum supply current. Using a frequency of 40MHz, it is very efficient. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. There are currently 3 timers/counters set up on the system. There is an oscillator type Internal used in this circuit.
DSPIC33FJ12GP201-E/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12GP201-E/SO Applications
There are a lot of Microchip Technology DSPIC33FJ12GP201-E/SO Microcontroller applications.
- ECG machine
- Automatic staplers
- Sonography (Ultrasound imaging)
- Kindle
- Toys
- X-ray
- Teletext terminals
- Computed Tomography (CT scan)
- Instrument control
- Temperature sensing and controlling devices
