Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SSOP (0.209, 5.30mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2005 |
Series |
Automotive, AEC-Q100, dsPIC™ 33F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
40MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DSPIC33FJ12GP2 |
Pin Count |
28 |
Operating Supply Voltage |
3.3V |
Interface |
I2C, IrDA, SPI, UART, USART |
Memory Size |
12kB |
Oscillator Type |
Internal |
Number of I/O |
21 |
RAM Size |
1K x 8 |
Voltage - Supply (Vcc/Vdd) |
3V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
12KB 12K x 8 |
Connectivity |
I2C, IrDA, SPI, UART/USART |
Supply Current-Max |
90mA |
Bit Size |
16 |
Data Converter |
A/D 10x12b |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
16b |
PWM Channels |
YES |
DAC Channels |
NO |
Number of Timers/Counters |
3 |
ROM (words) |
4096 |
On Chip Program ROM Width |
24 |
Format |
FLOATING-POINT |
RAM (words) |
512 |
Height Seated (Max) |
2mm |
Length |
10.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
DSPIC33FJ12GP202-E/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. It is available in the Tube package. dsPIC core processor is present on the device. During work, the temperature should remain at -40°C~125°C TA. FLASH is the type of program memory used by it. A total of 21 I/Os are present. It has a base part number of DSPIC33FJ12GP2 that can be used to find other components that are comparable. This device has terminals at DUAL. This circuit consists of 28 terminationals. It is a member of the Automotive, AEC-Q100, dsPIC? 33F series of electrical components. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. There are 28 pins on it. In the subcategory of Digital Signal Processors, this component is included. The devices have a memory size of 12kB that can be used to store programs and data. Supply current cannot exceed 90mA. Using a frequency of 40MHz, it is very efficient. While employing 3.3V, designers can maximize its supply voltage adaptability. The number of timers and counters is 3. The oscillator type Internal is used to operate the device.
DSPIC33FJ12GP202-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12GP202-E/SS Applications
There are a lot of Microchip Technology DSPIC33FJ12GP202-E/SS Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Heart rate monitors
- Glucose monitoring systems (for Type 1 Diabetes)
- Sonography (Ultrasound imaging)
- Heater/Fan
- Television
- Set-top boxes
- Security systems
- Fax machines
- Telephone sets