DSPIC33FJ12GP202-I/SO
| Parameters | |
|---|---|
| Format | FLOATING-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12GP2 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Nominal Supply Current | 38mA |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| Density | 96 kb |
| ROM (words) | 4096 |
| Number of A/D Converters | 1 |
DSPIC33FJ12GP202-I/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. A Surface Mount mounting method is used. In the package Tube, it is included. Devices with dsPIC core processors are available. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 21 I/Os on it. Based on the DSPIC33FJ12GP2 base part number, it can be compared with other components. The position of the device is DUAL at terminal. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series dsPIC? 33F. Because of the 3.3V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. For its construction, 28 pins are used. As a result, it is mounted in accordance with Surface Mount. There are a total of 28 pins on it. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 12kB that can be used to store programs and data. It performs extremely well at a frequency of 40MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. There are currently 3 timers/counters set up on the system. Using a Internal oscillator type, it works well.
DSPIC33FJ12GP202-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12GP202-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ12GP202-I/SO Microcontroller applications.
- Petrochemical
- Safety -airbags, automatic braking system (ABS)
- Printers
- Fax machines
- Robotic prosthetic limbs
- DDC control
- Fax machines
- 3D printers
- Hand-held metering systems
- Food and beverage
