DSPIC33FJ12GP202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ12GP2 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ12GP202-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It comes in a Tube package. Devices with dsPIC core processors are available. Work should be done at -40°C~85°C TA. FLASH is its program memory type. A total of 21 I/Os are available on this device. Based on its base part number of DSPIC33FJ12GP2, other similarly-sized components can be found. DUAL is the location of its terminals. 28 terminations are present in it. dsPIC? 33F is the series number of this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 28 pins are used. Mounting is performed in accordance with Through Hole. There are a total of 28 pins on it. It is one of the components included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 12kB. Supply current cannot exceed 90mA. Using a frequency of 40MHz, it is very efficient. The supply voltage of 3.3V's adaptability can be fully utilised by designers. There are currently 3 timers/counters set up on the system. An oscillator type Internal is required for it to work.
DSPIC33FJ12GP202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ12GP202-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ12GP202-I/SP Microcontroller applications.
- Gas monitoring systems
- Routers
- Temperature sensing and controlling devices
- Computer/laptop
- Dialysis machines (performs function of liver)
- Volt meter
- Process control devices
- Electrocardiogram (EKG)
- Wastewater treatment
- Air fryers
