DSPIC33FJ12GP202-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12GP2 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Format | FLOATING-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ12GP202-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. It is available in the Tube package. With a processor of dsPIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 21 I/Os on it. To find equivalent components, use its DSPIC33FJ12GP2 base part number. The terminals of this device are located at DUAL. 28 terminations are present in it. There are a number of electrical components in the dsPIC? 33F series, including this one. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. For its construction, 28 pins are used. As a result, it is mounted in accordance with Surface Mount. Total number of pins is 28. In Digital Signal Processors, this component is included. A device with a memory size of 12kB can store programs and data. Supply current is maximum at 90mA. When working at a frequency of 40MHz it is able to achieve excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. It appears that there are 3 timers/counters in use. Using an oscillator type of Internal, it works.
DSPIC33FJ12GP202-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12GP202-I/SS Applications
There are a lot of Microchip Technology DSPIC33FJ12GP202-I/SS Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Radio
- Projectors
- Electromechanical control
- Graphic terminals
- Heart rate monitors
- Dialysis machines (performs function of liver)
- Blood pressure monitors
- DDC control
- Toasters
