DSPIC33FJ12MC201-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12MC2 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 4x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 4 |
| Number of SPI Channels | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ12MC201-I/SO Overview
There is an option to purchase it in the 20-SOIC (0.295, 7.50mm Width) package, which saves space. Surface Mount is used for mounting. Tube is the package that contains it. There is a dsPIC as core processor in this device. Working at -40°C~85°C TA temperature is recommended. FLASH is its program memory type. There are 15 I/Os on it. A comparable component can be found by using the base part number DSPIC33FJ12MC2. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 20 terminations present. The dsPIC? 33F series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A number of 20 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. There are a total of 20 pins on it. The component is included in Digital Signal Processors. A device with a memory size of 12kB can store programs and data. The maximum supply current is set at 90mA. At a frequency of 40MHz, it exhibits excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. 3 timers/counters are in use. The oscillator type Internal is used to operate the device.
DSPIC33FJ12MC201-I/SO Features
20-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12MC201-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ12MC201-I/SO Microcontroller applications.
- ECG machine
- Washing machine
- Computer/laptop
- Dishwashers
- Entertainment-radios, CD players, televisions
- Microwave ovens
- Nintendo
- Television
- Laminators
- Petrochemical
