DSPIC33FJ12MC202-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12MC2 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ12MC202-E/SO Overview
To save space, it is included in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. There is a Tube package available for it. A dsPIC core processor powers the device. The temperature should be kept at -40°C~125°C TA while working. It has a type of program memory of FLASH. A total of 21 I/Os are present. Based on the DSPIC33FJ12MC2 base part number, it can be compared with other components. This device has terminals at DUAL. In this case, there are 28 terminationals. An electrical component such as this is included in the series Automotive, AEC-Q100, dsPIC? 33F. By using a 3.3V voltage supply, high efficiency is possible. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is constructed from 28 pins. According to Surface Mount, it is mounted. It is equipped with 28 pins in total. This is a component included in Digital Signal Processors. A device with a memory size of 12kB can store programs and data. A maximum supply current of 90mA is set. Using a frequency of 40MHz, it is very efficient. While employing 3.3V, designers can maximize its supply voltage adaptability. There are currently 3 timers/counters set up on the system. An oscillator type Internal is required for it to work.
DSPIC33FJ12MC202-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12MC202-E/SO Applications
There are a lot of Microchip Technology DSPIC33FJ12MC202-E/SO Microcontroller applications.
- Electromechanical control
- Home video and audio
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Dryers
- Kindle
- PDAs, game consoles
- Removable disks
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Laminators
- Auto-breaking system
