DSPIC33FJ12MC202-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12MC2 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of SPI Channels | 1 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ12MC202-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. Package Tube contains it. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. 21 I/Os are present on the device. A component with the same part number as DSPIC33FJ12MC2 can be compared to other similar components. DUAL is the position of its terminals on the board. A 28 termination is contained within it. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. Total number of pins is 28. This component is a part of Digital Signal Processors. The devices have a maximum memory size of 12kB that can be used to store programs and data. 90mA is the maximum supply current. At a frequency of 40MHz, it exhibits excellent efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 3 timers/counters are in use. There is an oscillator type Internal used in this circuit.
DSPIC33FJ12MC202-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12MC202-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ12MC202-I/SO Microcontroller applications.
- Process control devices
- Food and beverage
- Printers
- Oscilloscopes
- Coffee machines
- Safety -airbags, automatic braking system (ABS)
- Heart rate monitors
- Mice
- Industrial instrumentation devices
- Automatic staplers
