DSPIC33FJ12MC202-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ12MC2 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 12K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ12MC202-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. Surface Mount is used for mounting. Package Tube contains it. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. 21 I/Os have been provided by the device. It has a part number of DSPIC33FJ12MC2 that can be used to locate similar components. DUAL is the location of its terminals. This circuit consists of 28 terminationals. The dsPIC? 33F series includes this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. It has a total of 28 pins on it. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 12kB that can be used to store programs and data. 90mA is the maximum supply current. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. There are 3 timers/counters. Normally, the supply voltage (Vsup) should remain above 3V. The oscillator type Internal is used to operate the device.
DSPIC33FJ12MC202-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ12MC202-I/SS Applications
There are a lot of Microchip Technology DSPIC33FJ12MC202-I/SS Microcontroller applications.
- Food and beverage
- Scanners
- Entertainment products
- Current meter
- Oil and gas
- Instrument control
- Tape drives
- Calculators
- Removable disks
- Mobile computers
