DSPIC33FJ16GP102-I/SS
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 5461 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 35 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16GP1 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 16 MHz |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
DSPIC33FJ16GP102-I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Surface Mount is the way to mount it. Package Tube contains it. Devices with dsPIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. There are 21 I/Os on it, which makes it a very simple device. To find equivalent components, use its DSPIC33FJ16GP1 base part number. DUAL is the position of its terminals on the board. In this case, there are 28 terminationals. The dsPIC? 33F series contains this electrical component. The 3.3V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 28 pins are required to construct this device. A total of 28 pins are attached to it. It falls under the category of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 16kB. This device achieves excellent efficiency at frequencies of 32MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. There are 3 timers/counters. A chip with 35 programmable inputs/outputs is available. Using oscillator type Internal makes it work.
DSPIC33FJ16GP102-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16GP102-I/SS Applications
There are a lot of Microchip Technology DSPIC33FJ16GP102-I/SS Microcontroller applications.
- Wastewater treatment
- Process control devices
- Television
- Ipod
- Scanners
- Hand-held metering systems
- Projector
- Process control devices
- Toasters
- Communication-bluetooth, Wi-Fi, radio
