DSPIC33FJ16GS402-E/SO
| Parameters | |
|---|---|
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 160mA |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 8 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | AEC-Q100; TS 16949 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16GS402 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
DSPIC33FJ16GS402-E/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Mounted using Surface Mount. It is available in the Tube package. The device runs in dsPIC core processor. Working at -40°C~125°C TA temperature is recommended. The type of memory it uses is FLASH. The device has 21 I/Os. To find equivalent components, use its DSPIC33FJ16GS402 base part number. This device has terminals at DUAL. This circuit consists of 28 terminationals. The electrical component is part of the series Automotive, AEC-Q100, dsPIC? 33F. The 3.3V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is DIGITAL SIGNAL PROCESSOR, OTHER. A total of 28 pins are required to construct this device. According to Surface Mount, it is mounted. 28 pins are on it in total. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 16kB which may be used to store programs and data. A maximum supply current of 160mA is set. The system is highly efficient when working at a frequency of 40MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 3 timers/counters set up on the system. Using a Internal oscillator type, it works well.
DSPIC33FJ16GS402-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16GS402-E/SO Applications
There are a lot of Microchip Technology DSPIC33FJ16GS402-E/SO Microcontroller applications.
- Measuring revolving objects
- Xbox
- Fabric
- Automatic staplers
- Telephone sets
- Microwave ovens
- Process control devices
- Oscilloscopes
- Robots
- Petrochemical
