DSPIC33FJ16GS402-I/MM
| Parameters | |
|---|---|
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 160mA |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16GS402 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 50 MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
DSPIC33FJ16GS402-I/MM Overview
There is a 28-VQFN Exposed Pad package available to save space. Using Surface Mount, it is mounted. In the package Tube, it is included. A dsPIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. The device has 21 I/Os. A component with the same part number as DSPIC33FJ16GS402 can be compared to other similar components. QUAD is the location of its terminals. There are a total of 28 terminations in it. An electrical component such as this is included in the series dsPIC? 33F. Because the supply voltage is 3.3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. As a result, it is mounted in accordance with Surface Mount. A total of 28 pins are attached to it. This is a component included in Digital Signal Processors. Memory size for the devices is 16kB, which can be used to store programs and data. The maximum supply current is set at 160mA. The system is highly efficient when working at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. 3 timer/counters are present. Using oscillator type Internal makes it work.
DSPIC33FJ16GS402-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16GS402-I/MM Applications
There are a lot of Microchip Technology DSPIC33FJ16GS402-I/MM Microcontroller applications.
- Medical instruments chromatographs
- Firewalls
- Robots
- Automatic control
- Industrial instrumentation devices
- Current meter
- Pacemakers (used to control abnormal heart rhythm)
- Digital cameras
- Mobile computers
- Smartphone
