DSPIC33FJ16GS502-E/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16GS502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 160mA |
| Bit Size | 16 |
| Data Converter | A/D 16x10b; D/A 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 8 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | AEC-Q100; TS 16949 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ16GS502-E/MM Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. It comes in a Tube package. A dsPIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 21 I/Os are available on this device. To find equivalent components, use its DSPIC33FJ16GS502 base part number. QUAD is the position of its terminals on the board. It has 28 terminationals. This electrical component is part of the Automotive, AEC-Q100, dsPIC? 33F series. By using a 3.3V voltage supply, high efficiency is possible. DIGITAL SIGNAL PROCESSOR, OTHER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. A method of mounting is used, which is Surface Mount. On it, there are 28 pins. It falls under the category of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 16kB. A maximum supply current of 160mA is set. This device achieves excellent efficiency at frequencies of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 3 timers/counters have been set up. It works with an oscillator type Internal.
DSPIC33FJ16GS502-E/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16GS502-E/MM Applications
There are a lot of Microchip Technology DSPIC33FJ16GS502-E/MM Microcontroller applications.
- Ipad
- Robotic prosthetic limbs
- PDAs, game consoles
- Tape drives
- Nintendo
- Safety -airbags, automatic braking system (ABS)
- Heart rate monitors
- Digital TVs
- Oil and gas
- Toys
