DSPIC33FJ16GS502-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16GS502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 160mA |
| Bit Size | 16 |
| Data Converter | A/D 16x10b; D/A 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 8 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | AEC-Q100; TS 16949 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ16GS502-E/SO Overview
A space-saving advantage is that it is included in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is the way to mount it. It is available in the Tube package. The device runs in dsPIC core processor. When working, the temperature should be kept at -40°C~125°C TA. FLASH has been assigned to it as a program memory. A total of 21 I/Os are available on this device. A component with the same part number as DSPIC33FJ16GS502 can be compared to other similar components. The terminals of this device are located at DUAL. It has 28 terminationals. This electrical component is part of the Automotive, AEC-Q100, dsPIC? 33F series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. DIGITAL SIGNAL PROCESSOR, OTHER is this gadget's uPs/uC/peripheral IC. It is constructed with 28 pins. It is mounted based on the method of Surface Mount. Total number of pins is 28. Digital Signal Processors contains this component. The devices have a maximum memory size of 16kB that can be used to store programs and data. A maximum supply current of 160mA is set. At a frequency of 40MHz, it can achieve excellent efficiency. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. A total of 3 timers/counters have been set up. There is an oscillator type Internal used in this circuit.
DSPIC33FJ16GS502-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16GS502-E/SO Applications
There are a lot of Microchip Technology DSPIC33FJ16GS502-E/SO Microcontroller applications.
- Oil and gas
- Guidance-GPS
- Digital TVs
- Robots
- X-ray
- Smartphones-calling, video calling, texting, email
- Entertainment-radios, CD players, televisions
- Projector
- Measuring revolving objects
- Magnetic resonance imaging (MRI)
