DSPIC33FJ16GS502-I/SP
| Parameters | |
|---|---|
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b; D/A 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ16GS502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 50 MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
DSPIC33FJ16GS502-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. There is a Tube package available for it. It is equipped with a dsPIC core processor. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. 21 I/Os have been provided by the device. A comparable component can be found by using the base part number DSPIC33FJ16GS502. At DUAL, it has its terminals. A 28 termination is contained within it. The dsPIC? 33F series includes this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. It is constructed using 28 pins. According to Surface Mount, Through Hole, it is mounted. Total number of pins is 28. It falls under the category of Digital Signal Processors. The devices have a maximum memory size of 16kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. There are 3 timers/counters. There is an oscillator type Internal used in this circuit.
DSPIC33FJ16GS502-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ16GS502-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ16GS502-I/SP Microcontroller applications.
- X-ray
- Aerospace navigation systems
- Nintendo
- Playstation
- Hand-held metering systems
- Oscilloscopes
- Industrial instrumentation devices
- Heart rate monitors
- Home appliances
- Digital set-top boxes
