DSPIC33FJ16MC304-I/ML
| Parameters | |
|---|---|
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Supplier Device Package | 44-QFN (8x8) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ16MC304 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 40 MIPs |
| RAM Size | 2K x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| Core Architecture | dsPIC |
| Max Frequency | 40MHz |
| Number of Programmable I/O | 35 |
| Number of UART Channels | 1 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 1 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
DSPIC33FJ16MC304-I/ML Overview
A space-saving advantage is that it is included in the 44-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. Tube is the package that contains it. The device runs in dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. There are 35 I/Os on the board. A component with the same part number as DSPIC33FJ16MC304 can be compared to other similar components. There are a number of electrical components in the dsPIC? 33F series, including this one. Storage of data is performed using memory type FLASH. For its construction, 44 pins are used. As a result, it is mounted in accordance with Surface Mount. The devices have a maximum memory size of 16kB that can be used to store programs and data. In terms of architecture, it is based on dsPIC. It performs extremely well at a frequency of 40MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. 3 counters/timers are currently active. It operates at a maximum frequency of 40MHz. A temperature of less than 85°C is recommended for the operating environment. It is recommended to work at a temperature higher than -40°C. A chip with 35 programmable inputs/outputs is available. An oscillator of type Internal is used.
DSPIC33FJ16MC304-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Minimum temperature of -40°C
DSPIC33FJ16MC304-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ16MC304-I/ML Microcontroller applications.
- Digital set-top boxes
- Ipod
- Walkie talkies
- Telephone sets
- Current meter
- DCS control intelligent sensor
- Electrocardiogram (EKG)
- X-ray
- Instrument control
- Playstation
