DSPIC33FJ16MC304-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ16MC304 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 70mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| Number of SPI Channels | 1 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ16MC304-I/PT Overview
A space-saving advantage is that it is included in the 44-TQFP package. The way of Surface Mount is used to mount it. This item can be found in package Tray. There is a dsPIC as core processor in this device. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 35 I/Os are present on the device. A comparable component can be found by using the base part number DSPIC33FJ16MC304. At QUAD, it has its terminals. Currently, it consists of 44 terminationals. The electrical component is part of the series dsPIC? 33F. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. It is constructed using 44 pins. Based on the Surface Mount method, it is mounted. On it, there are 44 pins. It falls under the category of Digital Signal Processors. A device with a memory size of 16kB can store programs and data. The maximum supply current is set at 70mA. At a frequency of 40MHz, it exhibits excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. In total, there are 3 timers and counters. An oscillator type Internal is required for it to work.
DSPIC33FJ16MC304-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ16MC304-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ16MC304-I/PT Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Torpedo guidance
- Petrochemical
- Industrial robot
- Digital cameras
- Embedded gateways
- Information appliances (networking of household appliances)
- Leakage current tester
- Data acquisition and control
- Sonography (Ultrasound imaging)
