DSPIC33FJ256GP506T-I/PT
| Parameters | |
|---|---|
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
DSPIC33FJ256GP506T-I/PT Overview
It is available in the 64-TQFP package for the benefit of saving space. It is mounted using the way of Surface Mount. You can find it in the package of Tape & Reel (TR). With a processor of dsPIC cores, the device is powered. Maintain a temperature of -40°C~85°C TA while working. There is FLASH program memory in it. The device has 53 I/Os. A comparable component can be found by using the base part number DSPIC33FJ256GP506. At QUAD, its terminals are located. This circuit consists of 64 terminationals. It is a member of the dsPIC? 33F series of electrical components. By using a 3.3V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 64 pins are used. Mounting is performed in accordance with Surface Mount. It is equipped with 64 pins in total. It is one of the components included in Digital Signal Processors. In the device, there is a memory capacity of 256kB which may be used to store programs and data. Working at a frequency of 40MHz results in excellent efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. There are currently 9 timers/counters set up on the system. The oscillator type Internal is used to operate the device.
DSPIC33FJ256GP506T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP506T-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ256GP506T-I/PT Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- Electrocardiogram (EKG)
- Digital TVs
- Fire alarms
- Data acquisition and control
- Industrial instrumentation devices
- Fax machines
- Oscilloscopes
- Missile control
- Industrial robot
