DSPIC33FJ256GP510-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP510 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Format | FIXED-POINT |
| Number of ADC Channels | 32 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256GP510-I/PF Overview
There is a 100-TQFP package available to save space. This is mounted using the Surface Mount method. This item can be found in package Tray. The device has a dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 85 I/Os on the board. It has a part number of DSPIC33FJ256GP510 that can be used to locate similar components. The terminals of this device are located at QUAD. In this case, there are 100 terminationals. The dsPIC? 33F series contains this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 100 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. On it, there are 100 pins. This component is a part of Digital Signal Processors. The devices have a maximum memory size of 256kB that can be used to store programs and data. There is 3.3V power source in this device. At a frequency of 40MHz, it exhibits excellent efficiency. There are 9 timers/counters. A supply voltage (Vsup) above 3V is necessary for normal operation. The oscillator type Internal is used to operate the device.
DSPIC33FJ256GP510-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP510-I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ256GP510-I/PF Microcontroller applications.
- Heart rate monitors
- Digital cameras
- 3D printers
- Nintendo
- Blenders
- Mice
- Communication-bluetooth, Wi-Fi, radio
- Computed Tomography (CT scan)
- Industrial robot
- Electronic jamming systems
