DSPIC33FJ256GP510-I/PT
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP510 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Format | FIXED-POINT |
| Number of ADC Channels | 32 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
DSPIC33FJ256GP510-I/PT Overview
As a result, it is available in the 100-TQFP package. Using Surface Mount, it is mounted. You can find it in the package of Tray. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. There are 85 I/Os on the board. It has a base part number of DSPIC33FJ256GP510 that can be used to find other components that are comparable. At QUAD, it has its terminals. A 100 termination is contained within it. There are a number of electrical components in the dsPIC? 33F series, including this one. As a result of the 3.3V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 100 pins are used. According to Surface Mount, it is mounted. It is equipped with 100 pins in total. The component is included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 256kB. This device achieves excellent efficiency at frequencies of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 9 counters/timers are currently active. Using oscillator type Internal makes it work.
DSPIC33FJ256GP510-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP510-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ256GP510-I/PT Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Calculator
- Toys
- Radio
- Home video and audio
- Paper shredders
- Guidance-GPS
- Routers
- Fire detection & safety devices
- Fax machines
