DSPIC33FJ256GP710-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 30K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Number of A/D Converters | 2 |
| Format | FIXED-POINT |
| Number of ADC Channels | 64 |
| Number of PWM Channels | 8 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256GP710-I/PF Overview
There is an option to purchase it in the 100-TQFP package, which saves space. Mounted using Surface Mount. Package Tray contains it. The device has a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. The device has 85 I/Os. To find equivalent components, use its DSPIC33FJ256GP710 base part number. QUAD is the position of its terminals on the board. This circuit consists of 100 terminationals. The dsPIC? 33F series includes this electrical component. The 3.3V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is constructed from 100 pins. During the mounting process, the device is mounted based on the Surface Mount method. This device has a total of 100 pins. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 256kB. Working at a frequency of 40MHz results in excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. In total, there are 9 timers and counters. Using oscillator type Internal makes it work.
DSPIC33FJ256GP710-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP710-I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ256GP710-I/PF Microcontroller applications.
- Smartphone
- Tape drives
- Instrument control
- Food and beverage
- Teletext terminals
- Process control devices
- Dishwashers
- Current meter
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Automatic control
