DSPIC33FJ256GP710-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 30K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Format | FIXED-POINT |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256GP710-I/PT Overview
To save space, it is included in the 100-TQFP package. It is mounted using the way of Surface Mount. Package Tray contains it. A dsPIC core processor powers the device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. There are 85 I/Os on the board. A component with the same part number as DSPIC33FJ256GP710 can be compared to other similar components. The terminals are positioned at QUAD. Currently, it consists of 100 terminationals. The dsPIC? 33F series contains this electrical component. High efficiency is possible due to the 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. It is constructed using 100 pins. The method of Surface Mount is used to mount it. On it, there are 100 pins. It belongs to the subcategory Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 256kB. It performs extremely well at a frequency of 40MHz. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. The number of timers and counters is 9. An oscillator type Internal is required for it to work.
DSPIC33FJ256GP710-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP710-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ256GP710-I/PT Microcontroller applications.
- Safety -airbags, automatic braking system (ABS)
- Removable disks
- Hard drives
- Firewalls
- Binding machines
- Radio
- Hearing aids
- Dishwashers
- Light sensing & controlling devices
- Aerospace navigation systems
