DSPIC33FJ256GP710T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 30K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256GP710T-I/PT Overview
Due to the benefits of saving space, it is available in the 100-TQFP package. It is mounted using the way of Surface Mount. It comes in a Tape & Reel (TR) package. dsPIC core processor is present on the device. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 85 I/Os are present on the device. Based on the DSPIC33FJ256GP710 base part number, it can be compared with other components. At QUAD, its terminals are located. This circuit consists of 100 terminationals. The dsPIC? 33F series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed using 100 pins. As a result, it is mounted in accordance with Surface Mount. It is equipped with 100 pins in total. Subcategory Digital Signal Processors includes this component. In the device, there is a memory capacity of 256kB which may be used to store programs and data. Working at a frequency of 40MHz results in excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 9 timers/counters set up on the system. Using an oscillator type of Internal, it works.
DSPIC33FJ256GP710T-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256GP710T-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ256GP710T-I/PT Microcontroller applications.
- Vacuum cleaners
- Oscilloscopes
- Information appliances (networking of household appliances)
- Keyboards
- Teletext terminals
- Virtual reality VR robots
- Embedded gateways
- Petrochemical
- Safety -airbags, automatic braking system (ABS)
- Fire detection & safety devices
